BBGDY - 0276 PICRIC ACID
- MSDS: BBGDY
- Manufacturer: J T BAKER INC
- Product Name: 0276 PICRIC ACID
- National Stock Number: 6810-00F000236
Product Identification
Product ID:0276 PICRIC ACID
MSDS Date:10/11/1985
FSC:6810
NIIN:00F000236
MSDS Number: BBGDY
Responsible Party
PHILLIPSBURG, NJ 08865-2219
US
Emergency Phone: 201-859-2151
Info Phone: 201-859-2151
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
PICRIC ACID
CAS: 88-89-1
RTECS: TJ7875000
Fraction By Weight: 80-90%
OSHA PEL 0.1 MG/CUM
ACGIH TLV: 0.1 MG/CUM=IC (SKIN)
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 10 - 15%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATING & DAMAGING TO
RESPIRATORY PASSAGES &/OR LUNGS. SKIN ABSORPTION: HARMFUL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: DERMATITIS. INHALATION: KIDNEY &/OR LIVER
DAMAGE.
First Aid
First Aid:EYES/SKIN: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:150C/302F
Extinguishing Media:WATER SPRAY
Fire Fighting Procedures:USE PROTECTIVE EQUIPMENT & SCBA W/FULL
FACEPIECE OPERATED IN POSITIVE PRESSURE MODE. MOVE CONTAINERS FROM
FIRE AREA SAFELY. USE WATER TO KEEP CONTAINERS COOL.
Unusual Fire/Explosion Hazard:CAN REACT VIOLENTLY W/SHOCK, FRICTION OR
HEAT. DRY MATERIAL MAY EXPLODE IF EXPOSED TO HEAT, FLAME OR SHOCK.
Accidental Release
Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT. SHUT OFF IGNITION
SOURCES, NO FLARES, SMOKING OR FLAMES IN AREA. WITH CLEAN SHOVEL,
CAREFULLY PLACE MATERIAL INTO CLEAN, DRY CONTAINER & COVER. REMOVE
FROM AREA. FLUSH SPILL AREA W/WATER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
IN COOL, DRY, WELL VENTILATED AREA AWAY FROM HEAT, SPARKS OR FLAME.
STORAGE COLOR CODE: RED. KEEP WET.
Other Precautions:IF THE WATER CONTENT DECREASES BELOW <10%, PICRIC
ACID BECOMES AN EXPLOSIVE. AVOID CONDITIONS THAT COULD LEAD TO LOSS
OF WATER. AVOID CONTACT W/EYES, SKIN, CLOTHING.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONCENTRATION EXCEEDS TLV, USE A
DUST/MIST RESPIRATOR. IF CONCENTRATION EXCEED CAPACITY OF
RESPIRATOR, USE A SCBA.
Ventilation:GENERAL OR LOCAL EXHAUST TO MEET TLV REQUIREMENTS.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES W/SIDESHIELDS
Other Protective Equipment:UNIFORM
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:122C/252F
Spec Gravity:1.77
Solubility in Water:MODERATE
Appearance and Odor:YELLOW, ODORLESS CRYSTALS
Percent Volatiles by Volume:10%
Stability
Stability Indicator/Materials to Avoid:NO
MOST COMMON METALS, STRONG BASES, AMMONIA, STRONG REDUCING AGENTS,
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SHOCK, FLAME, SPARKS OR OTHER
IGNITION SOURCES.
Hazardous Decomposition Products:OXIDES OF NITROGEN
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. FLAMMABLE SOLID. EPA HAZARDOUS WASTE NUMBER:
D001, D002, D003 (IGNITABLE, CORROSIVE, REACTIVE).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.